Technical Specifications

Dell™ PowerEdge™ 700 Systems User's Guide

Processor

Processor type

One Intel® Celeron® processor, minimum clock speed of 2.4 GHz
or
One Intel Pentium® 4 processor, minimum clock speed of 2.8 GHz

Front-side bus speed

Intel Celeron

400-MHz minimum

Intel Pentium 4

800-MHz minimum

Secondary cache

Intel Celeron

minimum of 128 KB of L2 cache

Intel Pentium 4

minimum of 512 KB of L2 cache

Processor
Processor type	One Intel® Celeron® processor, minimum clock speed of 2.4 GHz or One Intel Pentium® 4 processor, minimum clock speed of 2.8 GHz
Front-side bus speed
Intel Celeron	400-MHz minimum
Intel Pentium 4	800-MHz minimum
Secondary cache
Intel Celeron	minimum of 128 KB of L2 cache
Intel Pentium 4	minimum of 512 KB of L2 cache

Expansion Bus

Bus type

PCI, PCI-X

Expansion slots

PCI

Two 5 V, 32 bit, 33 MHz

PCI-X

Three 3.3 V, 64 bit, 66 MHz

Expansion Bus
Bus type	PCI, PCI-X
Expansion slots
PCI	Two 5 V, 32 bit, 33 MHz
PCI-X	Three 3.3 V, 64 bit, 66 MHz

Memory

Architecture

72-bit ECC unbuffered DDR1 SDRAM DIMMs, rated for 400-MHz operation, single- or dual-channel

Memory module sockets

Four 184-pin

Memory module capacities

256 MB, 512 MB, or 1 GB

Minimum RAM

256 MB

Maximum RAM

4 GB

Memory
Architecture	72-bit ECC unbuffered DDR1 SDRAM DIMMs, rated for 400-MHz operation, single- or dual-channel
Memory module sockets	Four 184-pin
Memory module capacities	256 MB, 512 MB, or 1 GB
Minimum RAM	256 MB
Maximum RAM	4 GB

Drives

Hard drives

SATA

Up to two 1-inch, internal drives with the integrated drive controller; up to four with the optional SATA RAID controller card (when available)

SCSI

Up to four internal 1-inch SCSI hard drives (hot-plug or non-hot-plug) with the optional SCSI or SCSI RAID controller card

Diskette drive (optional)

One 3.5-inch, 1.44-MB

Optical drives

CD, DVD, or combination CD-RW/DVD in a peripheral drive bay

Tape backup unit

Optional IDE or SCSI in a peripheral drive bay

Drives
Hard drives
SATA	Up to two 1-inch, internal drives with the integrated drive controller; up to four with the optional SATA RAID controller card (when available)
SCSI	Up to four internal 1-inch SCSI hard drives (hot-plug or non-hot-plug) with the optional SCSI or SCSI RAID controller card
Diskette drive (optional)	One 3.5-inch, 1.44-MB
Optical drives	CD, DVD, or combination CD-RW/DVD in a peripheral drive bay
Tape backup unit	Optional IDE or SCSI in a peripheral drive bay

Connectors

Externally accessible (back)

NIC

One RJ-45 (for integrated Gigabit NIC)

Parallel

25-pin

PS/2-style keyboard

6-pin mini-DIN

PS/2-compatible mouse

6-pin mini-DIN

Serial

9-pin, DTE, 6550-compatible

USB

Two 4-pin

Video

15-pin VGA

Connectors
Externally accessible (back)
NIC	One RJ-45 (for integrated Gigabit NIC)
Parallel	25-pin
PS/2-style keyboard	6-pin mini-DIN
PS/2-compatible mouse	6-pin mini-DIN
Serial	9-pin, DTE, 6550-compatible
USB	Two 4-pin
Video	15-pin VGA

Video

Video type

ATI Rage XL PCI video controller, VGA connector

Video memory

8 MB

Video
Video type	ATI Rage XL PCI video controller, VGA connector
Video memory	8 MB

Power

AC power supply

Wattage

330 W

Voltage

90–135 VAC, 47–63 Hz, maximum current 10 A
180–265 VAC, 47–63 Hz, maximum current 5 A

Heat dissipation

799 BTU/hr

Maximum inrush current

Under typical line conditions and over the entire system ambient operating range per power supply for 10 ms or less:
At 115 VAC, maximum cold inrush current is 35 A; maximum hot inrush current is 70 A

At 230 VAC, maximum cold inrush current is 70 A; maximum hot inrush current is 140 A

System battery

CR 2032 3.0-V lithium ion coin cell

Power
AC power supply
Wattage	330 W
Voltage	90–135 VAC, 47–63 Hz, maximum current 10 A 180–265 VAC, 47–63 Hz, maximum current 5 A
Heat dissipation	799 BTU/hr
Maximum inrush current	Under typical line conditions and over the entire system ambient operating range per power supply for 10 ms or less: At 115 VAC, maximum cold inrush current is 35 A; maximum hot inrush current is 70 A At 230 VAC, maximum cold inrush current is 70 A; maximum hot inrush current is 140 A
System battery	CR 2032 3.0-V lithium ion coin cell

Physical

Height

43.9 cm (17.3 in.)

Width

19.8 cm (7.8 in.)

Depth

50.0 cm (19.7 in.)

Weight

19.1 kg (42 lb)

Physical
Height	43.9 cm (17.3 in.)
Width	19.8 cm (7.8 in.)
Depth	50.0 cm (19.7 in.)
Weight	19.1 kg (42 lb)

Environmental

Temperature

Operating

10° to 35°C (50° to 95°F)

Storage

–40° to 65°C (–40° to 149°F)

Relative humidity

Operating

8% to 85% (noncondensing) with a maximum humidity gradation of 10% per hour

Storage

5% to 95% (noncondensing)

Maximum vibration

Operating

0.25 G at 3–200 Hz for 15 min

Storage

0.5 G at 3–200 Hz for 15 min

Maximum shock

Operating

One shock pulse in the positive z axis (one pulse on each side of the system) of 31 G for up to 2.6 ms

Storage

Six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 71 G for up to 2 ms

Altitude

Operating

–16 to 3048 m (–50 to 10,000 ft)

Storage

–16 to 10,600 m (–50 to 35,000 ft)

Environmental
Temperature
Operating	10° to 35°C (50° to 95°F)
Storage	–40° to 65°C (–40° to 149°F)
Relative humidity
Operating	8% to 85% (noncondensing) with a maximum humidity gradation of 10% per hour
Storage	5% to 95% (noncondensing)
Maximum vibration
Operating	0.25 G at 3–200 Hz for 15 min
Storage	0.5 G at 3–200 Hz for 15 min
Maximum shock
Operating	One shock pulse in the positive z axis (one pulse on each side of the system) of 31 G for up to 2.6 ms
Storage	Six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 71 G for up to 2 ms
Altitude
Operating	–16 to 3048 m (–50 to 10,000 ft)
Storage	–16 to 10,600 m (–50 to 35,000 ft)

Back to Contents Page