FECO BML # 4

	FECO:	BML # 4
	MODIFICATION NO:	N/A
	PRODUCT:	VDU'S & CHARISMA
	SUB-ASSEMBLY:	N/A
	ESTIMATED MAN HOURS:	N/A
	CLASS OF CHANGE:	INFORMATIONAL
	REASON FOR CHANGE:	FUNCTION KEY PROBLEMS WITH CHARISMA

Introduction

1. There have been problems using function keys with charisma.
   
   
2. When using a vdu with charisma, q term is used to determine the type of vdu; charisma then uses cob term info to interpret the function keys and utilises the specific default setting of that vdu's function keys; within the charisma programmes.
   
   
3. If the default settings have been changed at all, then the charisma programmes will not operate correctly.
   
   
4. With some vdu's it is possible to only default the function keys. In others, all the vdu set up values will be defaulted. In this case a note of any required settings should be made first and these values should be re-entered after defaulting.

Settings

5. The following lists the steps required to reset various vdu's function keys to their default condition.
   
   
6. Ti916
1. To reset all.
1. Press shift/set up keys for asc11 keyboard and alt/esc for epc keyboard.
2. Note existing set up values.
3. From main menu use arrows to highlight. Default all.
4. Press f12 to save and exit.
5. Re-enter set up and enter any values required noted in para 2.
2. To reset one individual key.
1. Press shift/setup or alt/esc as per para 1.1 above.
2. Select f8 function keys.
3. Press ctrl and fn where fn is function key to be defaulted, can be shifted fn.
4. Screen states to clear press home. Press home.
5. Press f12 to exit to main menu.
6. Press f12 to save and exit.
   
   

7. Ti924

 

1. Press alt/shift/backspace.
2. Highlight default.
3. Press enter.
4. Highlight save.
5. Press enter.
   
   
8. Ti928

 

1. Press setup key.
2. Use pgup/pg dn keys to highlight program.
3. Use up/down keys to highlight clear all keys.
4. Press enter. This will clear all the programmed keys.
5. Press setup key to exit and save.
   
   
9. Adds 4000

 

1. Press shift and set up.
2. Highlight load default programmable keys using/down arrows.
3. Press spacebar.
4. Press y.
   
   
10. Mc25/mc5/mc3+

 

1. Press shift and set up.
2. Note existing set up values if necessary.
3. Press f1 general set up.
4. Press d to default all values.
5. Re-enter any required values notes in 2 above.
6. Press s to save.
7. Exit by pressing f9.
   
   
11. Wyse 55

 

1. Press shift and set up.
2. Note all existing settings.
3. Press f12 twice to exit.
4. Press shift and set up to re-enter set ups.
5. Press enter to default all settings.
6. Press f12.
7. Press spacebar to toggle save to yes.
8. Press f12 to exit.
9. If required re-enter the setups and restore the values noted in para 2.
   
   

12 wyse 50/wyse 120

1. Press shift and set up.
2. Make a note of existing values.
3. Press shift and set up.
4. Press y to save changes.
5. Press shift and set up to re-enter set up.
6. Press esc to default all values.
7. Press y to save changes.
8. Press y to save changes.
9. Re-enter set ups and re-enter values noted in para 2 if required.

Return to Index