2. To set up a Wyse 120 VDU for use on Charisma

Enter the set up mode by pressing SHIFT & SELECT
Default the settings by pressing ENTER on the key pad
Change the settings to those listed in Para 3
Save & Exit using F12

3. F1 Display
   Columns= 80 Cursor = Blink Block Scrn Saver = On
   Lines = 24 Display = Dark Char Cell = 10 x 16
   Page= 1 x Lines Autopage = Off 80/132 Clr = Off

F2 General
Personality = VT 100 Enhance = On Status Line = On
Scrl = Jump Autoscrl = On Wrap EOL = On
Rcv CR = CR Monitor = Off Recognize DEL = Off

F3 Keyboard
Keyclick = Off Repeat = On Keycode = ASCII
Keylock = Caps Margin Bell = Off Bell Volume = 1
Language = ENGLISH Corner Key = Function

F4 KBD
Baud Rate = 19200 Data/Parity = 8/None Stop Bits = 1
Rcv Hndshk = XON-XOFF/XPC Rcv Hnddshk Level = 192 Xmt Hndshk = XON-XOFF
Comm = FDX Xmt Lim = None Host Port = Serial 1

F5 Miscellaneous
WPRT Intensity = Dim WPRT Reverse = Off WPRT Underline = Off
Blk End = US/CR Attribute = Char Multipage = On
Printer Attached = On Nulls Suppress = On

F6 ANSI1
Char Set = Multinational Char Mode = Multinational ANSI ID = VT 100
Cursor Keys = Normal Keypad = Numeric DEL = DEL/CAN
Feature Lock = Off Fkey Lock = Off Newline = Off

F7 ANSI2 Level
Print = ASCII Print Area = Screen Print Term = None
Send = All Send Area = Screen Send Term = None
Xfer Term = EOS Auto Answerback = Off Keys = Typewriter

F8 TABS

F9 ANSWER BACK

F10 KEYS

F11 PRINTER
Baud Rate = 9600 Data/Parity = 8/None Stop Bits = 1
Printer = Parallel

F12 TO EXIT