FECO COMMS # 45

	FECO:	COMMS # 45
	MODIFICATION NO:	N/A
	PRODUCT:	WORLDPORT PALMTOP FAXBOX ON UNIFAX
	SUB-ASSEMBLY:	N/A
	ESTIMATED MAN HOURS:	N/A
	CLASS OF CHANGE:	INFORMATIONAL
	REASON FOR CHANGE:	CONNECTION OF FAXBOX TO COMM1 PORT
	RELATED FECO/AB	FECO COMMS 13/1

1. There is a customer need to connect the Unifax facility to a com port on a system. COM 1 (dev term 00) must be used, as COM 2 must be left free for the UPS.
   
2. The procedure is the same as that listed in FECO COMMS # 13/1 MentorFax, EXCEPT changes as detailed below.
   
3. The cable to be used is not the standard Cable Type BC but a modified version shown below:-
   
   SYSTEMWORLDPORT
   COM 1PALMTOP FAXBOX
   9 pin25 pin
   D Type FemaleD Type Male

	Screen	1
2	Red	3
3	White	2
4	Blue	20
5	Green	7
6	Black Paired with Blue	6
7	Black Paired With White	4
8	Black Paired With Red	5
1	Black Paired With Green	8

 

4. Set up the UniFax facility i.a.w. FECO COMMS # 13/1 with the exceptions as follows:-
   Use Worldport Palmtop instead of WP24+
   in para 5.1 use "COMMS" instead of "FAX"
   after para 5.1 at TCL in COMMS enter "UNLINK-LINE n"
   where n is the number of the port the UniFax facility is connected to.
   Then enter "ACQUIRE-LINE n"
   Then continue with para 5.2 onwards.
   para 6.2 Filename use "COMMS, FAXES" instead of "FAXES"
   All other details as the same.

Return to Index