| Peripherals
[Main
Index] Last updated
30-Nov-2018
|
30/11/2018
 |
FECO
RouterBOARD ViBE # 76-1 |
RouterBOARD ViBE / MikroTik
RouterBOARD (html) 
 |
| 05/11/2018
|
COMMS#78-1
Billion 8800NL |
Configuration of the Billion
BiPAC 8800NL R2 Dual-WAN ADSL2+/VDSL2 WiFi Router (300Mbps N) (html)
|
| 25/10/2018
|
BC#16
Zebra MC67NA |
Zebra MC67NA Configuration
and Software Installation Instructions (html)
|
| 17/03/2017
|
FECO
ZyXEL SBG3300 # 77-1 |
ZyXEL SBG3300 ADSL/VDSL Router
UPDATED(html)
|
| 27/01/14
|
FECO
Intermec # 2 |
Intermec Desktop PC43t Label
Printer (html)
(also
see Product Manual Section) |
| 08/03/12
|
FECO
BC # 15 |
Symbol MC75A0 Configuration
and Software Installation Instructions.
|
| 07/07/10
|
FECO
BC # 14 |
Symbol MC9090-G Configuration
and Software Installation Instructions.
|
| 01/12/09
|
FECO
HPJET # 2 |
How to configure access to HP
JetDirect print servers through a ZyXEL router with the firewall up.
|
| 01/12/09
|
FECO
JET # 9 |
How to configure access to a
Perle JetStream through a ZyXEL router with the firewall up.
|
| 23/10/08
|
FECO
BC# 13 |
Symbol MC7094 Configuration
and Software Installation Instructions
|
| 04/12/07
|
FECO
IO# 16 |
Configuring the Axel Platine
M75 on Esprit systems |
| 29/01/07
|
FECO
BC # 12 |
Configuring the Symbol CRD8800-400E
4 port Ethernet cradle |
| 29/01/07
|
FECO
BC # 11 |
Symbol PPT8800 Configuration
and Software Installation Instructions |
| 29/01/07
|
FECO
HPJET # 1-1 |
Adding HP Jetdirect printers
on UnixWare and Open Unix 8 |
| 14/07/06
|
FECO
IO # 15 |
Introduction and Configuring
the Axel Platine M75 on Esprit systems. |
| 14/07/06 |
FECO
BC # 10 |
Metrologic MK9540 BCR (serial)
(html) |
| 04/04/06 |
FECO
COMMS # 73 |
CISCO 1841 Kilostream Router
(html) |
| 04/04/06 |
FECO
COMMS # 72 |
ZyXEL Prestige 662HW ADSL Router.
(html) |
| 20/07/05
|
FECO
COMMS # 71 |
ZyXEL Prestige 653HWI ADSL Router
(html) |
| 04/10/04
|
FECO
Intermec # 1-1 |
New Intermec EasyCoder C4 Bar
Code Label Printer (html)
(also
see Product Manual Section) |
| 17/08/04
|
FECO
OKI # 14 |
New Firmware Settings and Setup
of the OKI Microline 280 Printer (html) |
| 06/05/04
|
FECO
CASH #9-1 |
Introduction and Setup of the
Cashdrawer, CR-3100 and CR-3200 (html) |
| 22/08/03
|
FECO
COMMS # 70 |
Introduction to Perle 841 router.
|
| 10/06/03
|
FECO
COMMS # 68 |
Cisco ISDN to Chase SOHO and
OC531 routers. |
| 24/02/03
|
FECO
COMMS # 52-1 |
Office Connect 531 Kilostream
Connection - Setup information. Replaces FECO Comms
#52 |
| 24/02/03
|
|
|
| 17/02/03
|
|
|
| 01/11/93 |
FECO
BC # 2/2 |
To clarify cabling requirements
for WYSE 55 VDU. |
| 07/11/95 |
|
DATA LOGIC DL60 BAR CODE READER
- To release the EDP Standard Settings. |
| 03/07/00 |
|
To introduce the DATAWAND III bar
code reader. |
| 03/07/00 |
|
To introduce the TELXON PTC-910. |
| 29/03/01 |
|
To introduce the DATAWELL II barcode reader. |
| 08/01/98 |
|
To introduce the ZEBRA S300 printer. |
| 03/07/00 |
|
PDT 3100 Hand Held Data capture
Unit - On Motorola AIX System |
| 29/03/01 |
|
Installation Instructions for HHDCU - on
an SVR4 Charisma System. |
| 06/06/01 |
|
Installation Instructions for HHDCU - on
an SVR4 Charisma System. |
| 27/02/01 |
|
new Bar-Code Reader on Charisma.SYMBOL LS4004
BAR CODE READER |
| 01/07/01 |
|
To introduce and list standard settings
for the BROTHER M4318 printer. |
| 27/10/98 |
|
Replacement for black box modem splitter.
|
| 28/07/96 |
|
RS232 cash drawers - energising
signal. To overcome the problem of solenoid burn out. |
| 24/06/97 |
|
Introduction of new type of cashdrawer.INTELLIGENT
RS232 CASH DRAWER |
| 29/09/97 |
|
Additional test information.INTELLIGENT
RS232 CASH DRAWER |
| 05/09/97 |
|
To replace defective standard RS232
cashdrawer with an intelligent RS232 cashdrawer. |
| 18/07/97 |
|
Change to the original set-ups. GANDALF
KMUX |
| 18/08/94 |
|
To release revised cable spec. UNIFAX
UNICOMMS + REMOTE ORDER ENTRY |
| 09/01/96 |
|
To release the revised synchronous set-ups
for the 2100 when used with the 4232. |
| 04/11/96 |
|
To release the synchronous set-ups for the
4232 Modem. |
| 04/11/96 |
|
Introduction of the MISTRAL FX144E faxbox
to replace the MISTRAL FX24E. |
| 21/02/96 |
|
Introduction of the DOWTY/CRAY ARROW 80
multiplexer into the EDP range. |
| 21/02/96 |
|
Introduction of the DOWTY/CRAY ARROW 640
multiplexer into the EDP range. |
| 08/03/96 |
|
To introduce the MAXAM III+ dial up
modem. |
| 12/01/01 |
|
Additional Set-up Parameter.RACAL
MAXAM III+ MODEM |
| 21/02/96 |
|
The MAXAM IV, V+ and VII range of
modems from RACAL-MILGO. |
| 03/11/97 |
|
To introduce the MAXAM MXF range of modems.
|
| 03/11/97 |
|
To list additional set-up information -
MAXAM MXF range of modems. |
| 17/02/96 |
|
To introduce the TRICOM TEMPEST
quad. Asynchronous dial up modem |
| 17/02/96 |
|
To introduce the TRICOM MINIMUX multiplexer.
|
| 21/02/96 |
|
To introduce the DOWTY MAYZE 96 modem. |
| 04/11/96 |
|
To introduce the MULTITECH MT1432L modem. |
| 04/11/96 |
|
To update the configuration information.
MULTITECH MT 1432L MODEM |
| 22/07/96 |
|
To introduce the SONY KTX9100 VIEWDATA terminal. |
| 02/08/96 |
|
Introduction of GANDALF DESKPORTE modem. |
| 20/01/97 |
|
Introduce the CRAY DCX818 multiplexor
and list the standard settings. |
| 28/04/97 |
|
To list the revised settings - CRAY DCX818
multiplexor. |
| 27/01/97 |
|
To introduce the CRAY DCX832 multiplexor and list the standard settings.
|
| 28/04/97 |
|
To list the revised settings for the CRAY
DCX 832 multiplexor. |
| 28/01/98 |
|
To list the configuration information for
the MT1432 modem when used synchronously on a leased line. |
| 03/06/98 |
|
To introduce a new dial up diagnostic modem.US
Robotics Sportster Flash Modem |
| 02/03/99 |
|
There is a change to the set up string in
para 7.5 of FECO COMMS#41/1. |
| 08/06/98 |
|
table lists modems and their edp function |
| 21/09/98 |
|
Configuration of a DCE FAXBOX 30 on a SPECIALIX
MTS when using NCR SVR4 MP-RAS. |
| 14/05/99 |
|
Revised settings of modem.LASAT SAFIRE 288
MODEM |
| 16/11/98 |
|
Connection of Faxbox to comm1 port. |
| 08/06/99 |
|
Introduction of the 3COM office connect
remote 500 series wide area network router. |
| 08/03/99 |
|
Security access/dial-back using MTL1432
& MTL2834 modems. |
| 26/10/99 |
|
Introduction of security access - MTL1432
& MTL2834 modems. |
| 10/05/00 |
|
Update on introduction of security access
- MTL1432 & MTL2834 modems. |
| 22/04/99 |
|
To introduce the 3COM SUPERSTACK 11 1100
switch. |
| 22/07/99 |
|
Introduction of DCE Faxbox 2/30 & setups
for the faxbox |
| 11/10/00 |
|
Problems using diagnostic Modems |
| 22/02/00 |
|
Introduction of new modem for UniFax - DCE
FAXBOX 3/30 & UNIFAX. |
| 18/02/00 |
|
US Robotics Sportster modem - DIFFERENT
PSU's |
| 05/05/00 |
|
Configuration sequence for 531 ISDN Router. |
| 15/11/00 |
|
Introduction of new modem - MULTITECH
MT 2834BLIe MODEM. |
| 16/11/00 |
|
Introduction of CISCO Routers & Switches
- 1605 & 3600. |
| 08/02/01 |
|
Introduction of CISCO Routers
& Switches - Remove and destroy FECO COMMS#58 and replace with this
FECO. |
| 05/03/01 |
|
Introduction of CISCO 1605R Router. |
| 27/11/00 |
|
Introduction of Chase IO-Link Soho ISDN
Routers |
| 27/03/00 |
|
Revised edition of F.E.C.O. - Introduction
of Chase IO-Link Soho ISDN Routers |
| 27/11/00 |
|
Introduction of Chase IO-Link 130 Kilostream
Routers |
| 22/03/01 |
|
Reissue of complete FECO - Introduction
of Chase IO-Link 130 Kilostream Routers |
| 14/02/01 |
|
Introduction - Perle / Chase Bridges &
Routers. |
| 13/02/01 |
|
Introduction of new diagnostic modem - Multitech
MT5600ZDXe |
| 28/01/98 |
|
To list the revised installation procedure
for the hardwired 2 KVA LVC. |
| 27/10/98 |
|
Release of new ups for software - VIGILANT
7 UPS SOFTWARE. |
| 30/03/99 |
|
Introduction of NetUPS& Failsafe/Lansafe
III software. |
| 19/07/99 |
|
Setup instructions for MOP UPS UPS software. |
| 12/10/99 |
|
To prevent UPS from causing problems.Kleenpower
UPS's |
| 12/10/99 |
|
UPS SOFTWARE UTILISATION - Orderly Shutdown
and Power Fail Recovery (PFR). |
| 22/02/00 |
|
Introduction of new UPS - NCR4091
POWERWARE PRESTIGE. |
| 11/02/00 |
|
Introduction of updated product - Failsafe/Lansafe
III software Version 4.06 |
| 03/02/00 |
|
POWERMON II UPS SOFTWARE for NCR 4091, UPS
on NCR S20, S40, or 4300 running UNIX SVR4 03.02.xx. |
| 20/10/00 |
|
FAILSAFE/LANSAFE III SOFTWARE
V 4.13 - on NCR4091 UPS on Unix SVR4 03.02.xx. |
| 19/07/01 |
|
Introduction of new UPS - APC SMART-UPS
1400 as used on Vision 7400 Systems. |
| 28/03/95 |
|
MT 65 - Intermittent failures, resets, random
self testing, random NVRAM faults, poor paper stacking. *This feco should
be read in addition to FECO MT # 65*. |
| 23/04/96 |
|
MT660 & MT690 - Incompatibilities
between shuttle/ribbon board and new ribbon motor. |
| 19/09/96 |
|
MT691 PRINTER - CHANGE IN TYPE OF CAPACITOR
SCREW. |
| 19/09/96 |
|
Types of power supplies and problems. |
| 03/03/97 |
|
To list the calibration procedure for the
paper out and the paper motion sensors. |
| 15/10/97 |
|
To release the TALLY 2030/2130 printer
range. |
| 22/09/98 |
|
To release the TALLY 2045 & 2060 printers. |
| 03/07/95 |
|
The MT660 and MT690 have different
ribbon motors and they are not interchangeable. |
| 24/10/93 |
|
To release the OKI 410EX and OKI 810EX. |
| 16/11/98 |
|
OKI 810EX - Revised Settings
(£ not #)print a UK pound sign instead of a hash sign. |
| 26/10/99 |
|
OKI 393 - Listing of lamp & error indications. |
| 04/08/00 |
|
To list the standard DISYS Set-up for OKI
printers. |
| 18/07/01 |
|
To list the standard BCT Set-up for OKI
printers. |
| 04/01/00 |
|
Listed here are the descriptions of all
the DIP switches on the Brother 4018 Printer. |
| 23/02/00 |
|
MT 88, MT 290, MT 330, MT 340 - LOSING PRINT. |
| 05/11/98 |
|
Introduction of a new printer
- TALLY T6045 PRINTER |
| 03/03/99 |
|
Introduction of Tally T9112 Laser Printer. |
| 16/03/99 |
|
Tally Printers have revised their specification
for Parallel Printer Cabling. |
| 24/04/01 |
|
Introduction of printer - TALLY
T9116D LASER PRINTER |
| 10/08/94 |
|
To list the AUX port configuration.
Configure the aux port on wyse 55 |
| 22/02/95 |
|
Amendment to FECO WYSE 6/1 Update - configure
the aux port on wyse 55. |
| 25/11/94 |
|
To list the settings for the WYSE 55
when used on the molecular system. |
| 13/05/99 |
|
To introduce the WYSE 55 ES which has an
extra (parallel) port. |
| 23/08/96 |
|
Update - Wyse55-ES - using a
serial printer on the aux port, for a serial slave printer. |
| 04/12/97 |
|
To list the standard EDP settings of the
WYSE MC5C VDU. |
| 06/04/99 |
|
Wyse 55ESP VDU’s with an Enhanced PC
style keyboard. |
| 17/12/99 |
|
To list the setups for use with Charisma. |
| 21/01/00 |
|
To list the setups for use with Charisma. |
| 10/08/00 |
|
To List the Configuration for a Wyse120
VDU on CHARISMA. |