FECO 3000 # 36

 

The 3416 system may have from one to four SCSI interfaces installed. These may be a combination of 'On-Board' and Data LogicPlug-in boards. Both types are configured using the ECU contained on the system configuration diskette.

* IMPORTANT UNIX LOADING INFORMATION *

  1. Only Unix suitable for EISA Bus Systems can be loaded.
Version 02.03.00 can only be used with all SCSI devices connected to a Bus Logic SCSI Adaptor.
Version 02.03.V2 will load via Adaptec (On-Board) SCSI Adaptor and Bus Logic SCSI Adaptor or device/adaptorcombinations.

METHOD

For On-Board SCSI only:

Set BIOS map to C000h (automatically sets IRQ to 11).

For Bus Logic Plug-in SCSI:

ADDRESS IRQ ID

1st Board 330 14 7

2nd Board 334 5 7

3rd Board 230 10 7

For On-Board and Bus Logic:

  1. De-configure and de-install Plug-in SCSI pcb.
  2. Configure On-Board SCSI as above.
  3. Install Plug-in SCSI
  4. Configure Plug-in SCSI as '1st Board' above.

 

Return to Index