 |
FECO | RIO # 1 |
| Modification No | N/A | |
| Product | RIO | |
| Sub-Assembly | N/A | |
| Estimated Man Hours | N/A | |
| Class Of Change | MANDATORY | |
| Reason For Change | To document modifications necessary to/etc/ttydefs to support RIO Driver V1.02and a 3 wire hook-up |
FECO RIO #1
|
FECO | RIO # 1 |
| Modification No | N/A | |
| Product | RIO | |
| Sub-Assembly | N/A | |
| Estimated Man Hours | N/A | |
| Class Of Change | MANDATORY | |
| Reason For Change | To document modifications necessary to/etc/ttydefs to support RIO Driver V1.02and a 3 wire hook-up |
The standard VDU/PTR cable specification for use with rtas and driver version v1.02.
(version v1.02 has full powerfail recovery capabilities).
Cable specification
Rio 25 pin male d type VDU/PTR 25 pin d type
MALE |
MALE |
|
______________________ |
1 screen |
|
Rx data 2 |
_______________________ |
2 tx data |
Tx data 3 |
_______________________ |
3 rx data |
7 |
_______________________ |
7 |
Using the attached ttylabel as an example add clocal twice to each ttylabel to be used by rio
Testing. Once all changes have been made ensure vdus log intocharisma/UniVision satisfactorily and printers print and properly flow control.
(tech serv ref 97/25)