 |
FECO: | COMMS po 24 |
| MODIFICATION No: | N/A | |
| PRODUCT: | UNIFAX UNICOMMS + REMOTE ORDER ENTRY | |
| SUB-ASSEMBLY | N/A | |
| ESTIMATED MAN HOURS | N/A | |
| CLASS OF CHANGE: | INFORMATIONAL | |
| REASON FOR CHANGE: | TO RELEASE REVISED CABLE SPEC |
COMMS # po 24
|
FECO: | COMMS po 24 |
| MODIFICATION No: | N/A | |
| PRODUCT: | UNIFAX UNICOMMS + REMOTE ORDER ENTRY | |
| SUB-ASSEMBLY | N/A | |
| ESTIMATED MAN HOURS | N/A | |
| CLASS OF CHANGE: | INFORMATIONAL | |
| REASON FOR CHANGE: | TO RELEASE REVISED CABLE SPEC |
Change
1.Listed below is the revised cable spec for connecting an ncr3000 rtc to a faxbox or
modem for use with unifax,
unicomms or remote order entry.
2.This spec replaces existing edp cable specifications en & eu which are now obsolete.
3.Cable spec - designated type ew
Rtc faxbox/modem
25 pin D Type Male |
25 pin D Type Male |
|
1 |
||
2 |
White |
3 |
3 |
Red |
2 |
4 |
Blue |
8 |
5 |
Black |
20 |
7 |
Green |
7 |
1. Pin 1 must be connected at the faxbox/modem end only.
2. Maximum length 100ft.
(tech serv ref 15/8/3)
4.in addition to the above cable spec the following is also required:
* connection of the comms device must be to a 'golden' rtc.
Feco hps # 3 refers.
* the dtc driver must be version 2.01.01.07. Or better.
* the unix revision level must be at least
Release 02.02.00 version 01 os
5.testing
Test for function.
6.recordings
No specific recording action.