 |
FECO: | 7000 # 16 |
| MODIFICATION No: | N/A | |
| PRODUCT: | 6000/7000/8000 | |
| SUB-ASSEMBLY | SEAGATE 1.05GB DISK | |
| ESTIMATED MAN HOURS | N/A | |
| CLASS OF CHANGE: | INFORMATIONAL | |
| REASON FOR CHANGE: | TO RELEASE THE SEAGATE HAWK 2XL ST31051N 1.05GB SINGLE ENDED SCSI DISK DRIVE |
FECO 7000 # 16
|
FECO: | 7000 # 16 |
| MODIFICATION No: | N/A | |
| PRODUCT: | 6000/7000/8000 | |
| SUB-ASSEMBLY | SEAGATE 1.05GB DISK | |
| ESTIMATED MAN HOURS | N/A | |
| CLASS OF CHANGE: | INFORMATIONAL | |
| REASON FOR CHANGE: | TO RELEASE THE SEAGATE HAWK 2XL ST31051N 1.05GB SINGLE ENDED SCSI DISK DRIVE |
1. Change
This disk is
additional to the present range. It is a low cost 3 1/2" technology
single ended scsi drive
to be fitted in mentor 6000,7000 and 8000 systems.
The disk is 1 inch
high.
2. Installation
2.1 drive installation will require an adaptor
bracket to enable drive to be secured in
the 5 1/4" bays.
Fit the drive to the bracket before installing the system.
2.2 this disk has a ccb requirement of 1.05GB.
3. Jumpers
3.1 refer to the diagram for jumper locations.
SCSI address on j6
Id0 1 2 3 4 5 6 7
Jumper6out in out in out in out in
Jumper5out out in in out out in in
Jumper4out out out out in in in in
Terminating resistor/power jumpers on j2
Default. Drive supplies own power. 1= out 2= in
If last scsi device 8= in
If not last scsi device 8= out
(tech serv ref 96/10)
4. mec description
Mx-st31051n(1.05GB)
5. testing
Normal testing using standard procedures.
6. recording action
No specific recording action.