 |
FECO: | WYSE # 10 |
| MODIFICATION No: | N/A | |
| PRODUCT: | WYSE MC5C | |
| SUB-ASSEMBLY | N/A | |
| ESTIMATED MAN HOURS | N/A | |
| CLASS OF CHANGE: | INFORMATIONAL | |
| REASON FOR CHANGE: | TO LIST THE STANDARD EDP SETTINGS OF THE WYSE MC5C VDU |
FECO WYSE # 10
|
FECO: | WYSE # 10 |
| MODIFICATION No: | N/A | |
| PRODUCT: | WYSE MC5C | |
| SUB-ASSEMBLY | N/A | |
| ESTIMATED MAN HOURS | N/A | |
| CLASS OF CHANGE: | INFORMATIONAL | |
| REASON FOR CHANGE: | TO LIST THE STANDARD EDP SETTINGS OF THE WYSE MC5C VDU |
1. Reason for change
This is to list the standard EDP settings for the WYSE mc5c VDU which is also known as a visa mc25 or a link mc3+. They all look identical. The mono VDU has a main and parallel port. They also have customised firmware and BML badging.
2. Change
The spec is shown on page 2. The front and rear views are shown below.
(tech serv ref 96/01)
3. Specification
4. mec identification
The units are known as :-
Mc5c(white)
Mc5c(green)
Mc5c(amber)
5. servicing
Normal warranty and servicing procedures apply. Initially servicing will be by replacement.
6. Configuration
6.1 to enter set up mode press shift + select use the f keys to select the
required group of parameter. Use !
And ! To move within parameters block. Use -
and - to select parameters option. The general set up screen
is shown below.
1. Header block
2. Parameter item block
3. Option selection block
4. Function key directory
5. Host port indicator block
6.2 press d to return all parameters to original factory settings.
Press r to restore most recently saved settings.
Press s to save present settings.
Press f9 to exit set up mode.
6.3 set parameters to the required settings and save. Edp standard settings shown in para 7.
7. EDP standard settings
F1 GEN
Emulationaddsvpauto page off
Enhancementsonwarning bell on
Virtualterminaloffmargin bell off
Scroll stylejumpbell sound 1
Auto scrollonblock terminator us/cr
Auto wraponsend ack on
Receivedcrcrmonitor mode off
F2 COMM
Main baud9600auxl baud 9600
Main data/parity8/noneauxl date/parity 8/none
Mainstop bits1auxl stop bits 1
Mainrcvhndsknoneauxl rcv hndsk none
Mainxmthndsknoneauxl xmt hndsk none
Commodefull duplexprinter parallel
Disconnect2 secclear communication on/off
F3 DISP
Columns80attributes char
80/132 clearoffwprtintensity normal
Lines24wprtreverse on
Pages1 x lineswprtunderline off
Status lineonrefresher rate 60hz
Cursor styleblink blockpoundchar british
Cursoronauto font load on
Screen saver15 minspage edit off
Backgrounddark
F4 KBD
Key clickoffxmt limit none
Key repeatonf key xmt limit none
Key lockcapskey code asc11
Return keycrlanguage uk
Enter keycrdecimal separator point
Backspace keydel/bsepc panse key pause
Left alt keyfunctprint key remote
Break
F5 ANSI
Fkey lockoffprint multinational
Feature lockoffsend all
Key padnumericsend area screen
Xfor termeosprint area screen
Cursor keysnormalsend term none
Char modemultinationalprint term none
Keystypewriterprint mode normal
VT100 I dvt100auto answer back off
Press s to save.
F9 TO EXIT.
MEC listed987