FECO 7000 # 14

	FECO:	7000 # 14
	MODIFICATION No:	N/A
	PRODUCT:	6000/7000/8000
	SUB-ASSEMBLY	1.2GB DISK DRIVES
	ESTIMATED MAN HOURS	N/A
	CLASS OF CHANGE:	MANDATORY
	REASON FOR CHANGE:	POSSIBLE INCOMPATABILITY OF CCB SETTINGS WHEN REPLACING 1.2GB HARD DISKS.

1.There may be a problem when replacing 1.2gb hard disks, other than on a like for like
    basis.

    Change

2.The original disks used had a ccb requirement of 1.069GB.

    Original types used: seagate st41200n

    Hp97558

    Fuji m22665a

3.The newer disks available have a CCB requirement of 1.205GB.

    These are: hp 3724

    Fujitsu m1606

4.before attempting to replace a disk listed in 2 above, with one listed in 3, you are
    to carry out the following:

4.1.check and note the CCB setting on the CCB tape.

4.2.If 1.205GB - continue with replacement.

4.3.If not 1.205GB - inform the service centre manager that another installation tape is
     required with the disk size set to 1.205GB.

5.The service centre manager is responsible for arranging the new installation tape.

    (tech serv ref 26/5/3)

Return to Index