TALLY # 96

	FECO:	TALLY # 96
	MODIFICATION NO:	N/A
	PRODUCT:	ALL TALLY PARALLEL PRINTERS
	SUB-ASSEMBLY:	N/A
	ESTIMATED MAN HOURS:	N/A
	CLASS OF CHANGE:	MANDATORY
	REASON FOR CHANGE:	INTRODUCTION OF NEW SPECIFICATION
	RELATED FECO/AB	N/A

1. INTRODUCTION
   Tally Printers have revised their specification for Parallel Printer Cabling.
   
2. SPECIFICATION
   The maximum length of parallel cable to be used is now 2 metres. This is a change from the previous specification of 3 metres.
   
   The cable used must be bi-directional i.e. IEEE1248.
   EDP Cable Type AS1 is the cable which must be used for connecting an NCR 3000 system or PC to a Tally Parallel Printer.