OKI # 12
FECO: |
OKI # 12 |
MODIFICATION NO: |
N/A |
PRODUCT: |
OKI 32x & 5xx PRINTERS ON DISYS SYSTEMS |
SUB-ASSEMBLY: |
N/A |
ESTIMATED MAN HOURS: |
N/A |
CLASS OF CHANGE: |
MANDATORY |
REASON FOR CHANGE: |
TO LIST THE STANDARD DISYS SET UP FOR OKI PRINTERS |
RELATED FECO/AB |
OKI # 2 |
OKI 32x & 5xx PRINTER SETUP for DISYS SYSTEMS
1 This
FECO is in addition to FECO OKI # 2, and does not supercede it,
For OKI 32x & 5xx printers
connected to a Disys System, then they should be set up as listed in para 6.
2 TO ENTER THE SET UP MODE
2.1 EITHER Switch the machine power ON whilst holding the MODE button.
2.2 OR with the power ON, press the MODE button. The MENU light on indicates the setup mode.
3 TO PRINT PRESENT SETTINGS
3.1 In the setup mode press the PRINT button.
3.2 The printer will print out the present settings. All the settings or Items are printed in Groups
by function; Font Vertical Control etc.
4 TO CHANGE A SETTING
4.1. . In the SETUP MODE, press the GROUP button until the first Item in the relevant Group is printed.
4.2 Press the ITEM button until the Item required is printed with its present setting.
4.3 Press the SET button until the printer prints out the new required setting.
4.4 Use the ITEM and GROUP buttons to display the next parameter to be changed, and
repeat para 4.3 as required.
5 TO EXIT SETUP MODE TO PRINTER
ON-LINE
Press the MODE button until
the MENU lamp extinguishes, and the SEL lamp lights.
6
DISYS SYSTEM SETTINGS
Font
Print mode
Utility
Font
Pitch
10 CPI
Font
Style
Normal
Font
Size
Single
Font
SI Select (IBM)
17.1 CPI
General Control Emulation Mode
Graphics Printer
General Control Graphics
Bi-directional
General Control Buffer Size
Normal
General Control Paper Out Override
No
General Control Print Registration
0
General Control Operator Panel
Functions Full
Operation
General Control Reset Inhibit
No
General Control Print Suppress
Effective
Yes
General Control Page Width
13.6" (9.5")
General Control CPU Compensation
Standard
Vertical Control Line Spacing
6 LPI
Vertical Control Form Tear-Off
300ms
Vertical Control Skip Over Perforation
No
Vertical Control Auto LF
No
Vertical Control Auto CR (IBM)
Yes
Vertical Control Auto Feed XT
(EPSON) Invalid
Vertical Control Page Length
11"
Vertical Control Sheet Page Length
11 2/3"
Vertical Control CSF Bin Select
Bin-1
Symbol Sets
Character Set
Set II
Symbol Sets Code
Page
USA
Symbol Sets
Language Set
ASCII
Symbol Sets Zero
Character
Unslashed
Symbol Sets
Slashed Letter 0
No
Symbol Sets
DLL Utility (IBM)
Normal
Serial I/F Option Parity
None
Serial I/F Option Serial Data 7 or 8 Bits
8
Serial I/F Option Protocol
X-ON/X-OFF
Serial I/F Option Diagnostic Test
No
Serial I/F Option Busy Line
SSD-
Serial I/F Option Baud Rate
9600 BPS
Serial I/F Option DSR Signal
Invalid
Serial I/F Option DTR Signal
Ready on Power up
Serial I/F Option Busy
Time
200ms
If the option for the Euro Symbol is present, then select it.