F. E. C. O. Index
  
January 22, 2019  
 
 I/O & Media     [Main Index] Last updated 22-Jan-2019
22/01/19 FECO IO #19 Installation and configuration of Axel 4010/4020 Terminal Server for Disys.
11/09/2015 FECO IO #17 Usage of /dev/null when adding rcp printers.
22/05/2014 COMMS#75 Introduction to the Configuration of the SSL VPN on Dell SonicWALL .
22/10/2013 BillionRouter Introduction to the BiPAC 7800N, 802.11n ADSL2+/Broadband Firewall Router with Gigabit Ethernet Switch .
21/04/2010 FECO IO # 16 Introduction to the D-Link DPR-1061 Print Server.
10/08/06 FECO IO # 14 Introduce the Perle IOLAN STS.
20/07/05 FECO TP # 13/1 DLT Tape Drives - DLT Vendor ID Label.
25/03/03 FECO IO# 12-2 Introduce the Chase IO-LAN+ and IOLAN+ Rack Communications Server- Re-issue.
25/03/03 FECO IO# 13 SPECIALIX MTS/MTA/JETSTREAM 6/8500-New Information (This replaces FECO's IO#1 IO#1/1 IO#1/2 IO#2 )
30/12/02
FECO IO# 6/4
New Configuration For AXIS 560 PRINT SERVER-(This replaces all previous releases )
19/08/02
FECO TP # 15
Introduction of the TANDBERG DLT8000 -
13/09/02
FECO TP # 16/1
STD224000N-SB - Replacement for the Tecmar 3800 4mm DAT Tape Drive.
17/08/93
FECO RTC # 2
Firmware Update - RTC TYPES HPS 9717HPS 9716.
22/08/93
FECO RTC # 3
HPS 79XX new style RTCS hang or stop other RTCS from configuring.
05/11/98
FECO IO # 3
Introduction of new Specialix Jetsetream 8500 Network Access Server.
27/04/99
FECO IO # 3/1
To introduce the Specialix Jetstream 8500, Network Access Server, as a replacement for MTS/MTA, Jetstream 6000 and 7000 series devices.
05/11/98
FECO IO # 4

SPECIALIX I/O8+ FITTED TO AN S20 RUNNING UNIX SVR4 03.02 AND UNIVISIONCONNECTION OF OLDER STYLE EQUIPMENTINCLUDING 1010 VDU’s and MT88 & NDR8820 PRINTER

04/08/00
FECO IO # 7
EDP introduce the Specialix Jetstream 4000, Network Access Server, as an smaller addition to the Jetstream 8500.
22/08/00
FECO IO # 8
AXIS 560 NETWORK PRINT SERVER on AIX without UNIVISION.
18/0601
FECO IO # 9
Introduction of new print server - AXIS 5600+ NETWORK PRINT SERVER
20/06/01
FECO IO # 10

INSTALLING AXIS 5600+ PRINT SERVER AT A REMOTE SITE (For Axis 5600+ up to Revision 6.10 Only, using Axis IP-Installer)

21/06/01
FECO IO # 11
Listing set-up for RIO LDM.
03/04/97
FECO TP # 8
To release details of DLT DRIVES NCR 6091 (External) Quantum DLT2000xt Series (Internal).
21/09/98
FECO TP # 9
Introduction of TRAVAN Tape Decks.
20/04/99
FECO TP # 10
TRAVAN Tape unit cleaning kits.
06/04/95
FECO TP 8MM # 7
To release details of new 8mm DAT tape drive - EXB 8205 TAPE DRIVE.
02/11/99
FECO TP # 10/1
Approved cleaning kits for Travan Tape units.This FECO supercedes FECO TP#10. Remove and destroy existing FECO TP#10 and replace with this FECO TP#10/1
26/10/99
FECO TP # 11
Listing of Tape compression setting - 4mm Tecmar 3800 Tape Decks on NCR 4300.
22/02/01
FECO TP # 12
Problems - different block sizes on tapes,Tape Block Length On NCR SVR4 System Tapes.
18/04/01
FECO TP # 14
Compatibility problems.Vision 7400 system has a 4mm DAT tape,is DDS4 technology which is 20/40 GB
15/08/95
FECO DAT # 2
WANGTEK 6130HS 1.3GB 4mm tape unit.
04/12/95
FECO DIGI # 1
To overcome digiboard port configuration problems, with configuring digiboard ports to run at 1200bds.
04/12/95
FECO DIGI # 2
The UV development team have identified some irregularities with the behaviour of the digiboard XP driver.
12/08/94
FECO HPS # 3
Data loss due to DTC driver & RTC type. RTC installed on AT&T SVR4 Unix 2.02 Systems
12/06/00
FECO SPECIALIX # 1
To enable RIO to work with a 3 wire hook up, you must edit "clocal" into all the tty labels